• Enter Manual Ip Address Mac Os
• Manual Ip Address Configuration

Enter the IP address listed in within your PC's network information, but add 20 to the last digit. For example, if your PC had an IPv4 address listed as 192.168.1.5, this will become 192.168.1.25. With this an all following entries, make sure to include the '.' Between each number.

• Tap 'IP Address' and enter your IP address by adding 20 to the IP address listed in your PC. Example: If your computer's IP address displays 192.168.2.5, you will enter it into the Wii U as 192.168.2.25. Tap 'Subnet Mask' and enter in the subnet mask as it appears in your network settings. Often, this is 255.255.255.000.
• Tap 'IP Address' and enter your IP address by adding 20 to the IP address listed in your PC. Example: If your computer's IP address displays 192.168.2.5, you will enter it into the Wii U as 192.168.2.25. Tap 'Subnet Mask' and enter in the subnet mask as it appears in your network settings. Often, this is 255.255.255.000.
• Jul 15, 2010  Previously we showed you how to set a Static IP in Windows, and you have a Mac machine on your network, you might want to assign it a Static IP as well. Set Static IP in OS X. You will need to open System Preferences, once there open Network. It would be a good idea to to edit the Locations so that you can easily change from DHCP to manual IP.
• Use DHCP or a manual IP address on Mac An Internet Protocol (IP) address is a number that identifies each computer across the Internet or a network. When you connect to the Internet or an IP network, your computer needs an IP address.
• Enter the same address as the one that you typed in step 2. Example: ping 192.168.1.45 -l 479 Restart the machine, and the specified IP address is configured in the machine.
• This is what a complete manual IP address assignment would look like in OS X Network settings: This is what the DHCP with manual address setting would look like: After you have selected your static IP address, click on “OK” in the corner. Click on the “Apply” button in the lower right corner.

please replace your cross over cable, and , use one smaller switch to connect both your pc and printer to this switch, see the ip address from HP printer manual, and type it on Browser like http://192.168.50.2 or telnet from DOS like >telnet 192.168.50.2, then change ip addr as dsired

Check the manual of printer for default IP address and configure your computers IP address in the same IP range as printer, then connect printer to computer. Now you can access printer through web browser as
(http:<printers IP address>
If you have any problems let me know..

Thanks-
I will try that. I think that I then need to determine the 'default IP address' for the printer, then configure the same printer IP address into my computers IP address range. Question(s) where do I go to do this configuration on my computer. Do I go to my Network Connections on my computer, select the Local Area Connection and change the properties on there? I am not sure where I go to configure the IP addressrange on my computer.

unless you've got an old NIC in your computer, it won't care so long as it's a CAT 4/5!
Check the manual or go to http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=au&prodTypeId=18972&prodSeriesId=25472&taskId=110

Enter Manual Ip Address Mac Os

Manual Ip Address Configuration

An Internet Protocol (IP) address is a number that identifies each computer across the Internet or a network. When you connect to the Internet or an IP network, your computer needs an IP address.

Your IP address can be provided in two main ways:

• Automatically: Your computer is assigned an address using Dynamic Host Configuration Protocol (DHCP).

• Manually: Your ISP or network administrator gives you an IP address, and you enter it in the Network pane of System Preferences.

Follow these steps to enter your IP address or have it assigned automatically.

1. On your Mac, choose Apple menu > System Preferences, then click Network.

2. Select the network connection you want to use (such as Ethernet) in the list.

3. Click the Configure IPv4 pop-up menu, then choose an option:

   • If your address will be assigned automatically, choose Using DHCP.

   • If your ISP or administrator gave you an IP address, choose Manually and enter the address in the IP Address field. Your ISP most likely gave you additional information such as the subnet mask, router, and Domain Name System (DNS) server address. Enter the subnet mask and router in the labeled fields. To enter the DNS server address, click Advanced, click DNS, then click the Add button and enter the address.

Note: Most IP addresses are IPv4 addresses, which look like a series of numbers separated by three periods, similar to this: 123.45.67.89. If you received an IP address that’s a longer series of numbers and letters, divided by seven colons (for example, fa80:0000:0000:0123:0203:93ee:ef5b:44a0), it’s a different type of IP address called IPv6. To enter an IPv6 address, in Network preferences, click Advanced. In TCP, change the Configure IPv6 pop-up menu to Manually, and enter your IPv6 address.